STRIP-20

High Powered Butyl Stripper

Benefits:
Save valuable labor dollars with STRIP-20.
STRIP-20 is a combination of detergents, wetting agents and water soluble solvents that break down polymer bonds and keep dirt and residue in suspension, with a penetrating action to emulsify numerous coats of finish for quick and easy clean-up.

Directions:
Dilute 1 part of STRIP-20 with 16 parts of water (1 cup per gal.); apply, allow too stand 5 minutes, rewet, scrub, pick up and rinse immediately.
For most conventional –cross linked floor finishes, dilute STRIP-20 1/4 cup per gallon.

Anything stronger than STRIP-20 will dissolve or soften the floor itself!
Do not uses STRIP-20 for all purpose cleaning because even in a very high dilution; STRIP-20 may attack painted surfaces.

Warning: Corrosive
Avoid contact with skin and eyes.

First Aid Procedures:
In case of contact with skin, flush with water for 15 minutes.
For eyes, flush with water for a minimum of 15 minutes and get prompt medical attention.
If swallowed, drink a large quantity of water. Do not induce vomiting.
Do not give anything by mouth to an unconscious person. Call a physician immediately (See MSDS).
Remove and wash clothing that has come in contact with chemical before reuse.

For more detailed information on product usage, contact FABPRO at
3000 E. Preston Street, Baltimore MD. 21213, or phone 410-325-5040.

For Professional Use Only
Keep Out of Reach of Children