Traffic Lane Cleaner SR

Powerful cleaning partner with detergent.
It readily combines with other detergents and loosens soil that resists detergents alone.

Easy to use directions.
ON LOCATION CLEANING:
As a pre-spray: dilute by putting 10 ounces of Traffic Lane Cleaner SR and filling with water to 1 gallon (12:1). Apply to carpet traffic lane using a portable sprayer. In order to increase cleaning efficiency, brush lightly with a hand pile brush.
As a cleaning solution booster: add 2 ounces of Traffic Lane Cleaner SR to each gallon of ready to use detergent or shampoo solution.
As an all purpose spotter: dilute 8 ounces of Traffic lane Cleaner SR with 24 ounces of water (3:1 dilution) and apply before scrubbing.
As a special restaurant pre-spray for protein grease soiled areas: in two (2) gallons of hot tap water, add 4 ounces of Fabpro’s Enzyme Powder Detergent USR and 6 ounces of Traffic Lane Cleaner SR. Spray over carpet and allow to stand for approximately five minutes before cleaning with normal, industry accepted cleaning procedures.
IN-PLANT USE:
With automatic scrubbers: dilute 10 ounces of Traffic Lane Cleaner SR with 120 ounces of water (12:1). Apply to rug with an in-plant sprayer before placing rug in machine. For heavily soiled rugs, allow diluted Traffic Lane Cleaner SR to remain on the rug for approximately five minutes before scrubbing.
Use with in-plant rotary scrubber: wet carpet with water. Dilute 10 ounces of Traffic Lane Cleaner SR with 120 ounces of water, spray soiled areas with mixture and scrub with detergent. If rug is heavily soiled, allow diluted Traffic Lane Cleaner SR to soak for approximately 5 minutes before scrubbing with detergent.

Flash point: None

pH: 6.0-8.0 concentrated. pH is closer to 7.0 when diluted with neutral pH water.

Conveniently packaged.
Available in 4/1 gallon cases or economical 5 gallon container and 55 gallon drum.