Kill Odor SR

Easy to use directions.
Simply spray properly diluted Kill Odor SR on affected area using a portable hand pump or electric sprayer. May also be added to the cleaning solution to provide a “special” clean fragrance to both carpet and air.
As a pre-spray:
Generally dilute Kill Odor SR with 5 parts water. For heavy odors, dilute with less water. Using a hand pump sprayer or electric sprayer, apply liberally on affected area with a course spray. Caution: DO NOT USE concentrated or diluted Kill Odor SR in a fogging machine.
Allow Kill Odor SR to remain on affected area as long as possible. Then clean using generally accepted carpet cleaning techniques. If odor persists, repeat procedure. If entire carpet needs treatment, the amount and dilution depends on the strength of the odor.
As a truck mount or portable extraction machine deodorant:
The use of 1 ounce of Kill Odor SR in 1 gallon of portable extraction machine ready-to-use cleaning solution, or 8-10 ounces of Kill Odor SR in a truck mount stock solution will freshen the carpet and the air.
If odor has settled to backing and pad, then a concentrated mixture of Kill Odor SR should be applied with a needle injector directly to carpet back and pad.
For hard surface deodorization:
Effective in deodorizing hard surface areas that produce odors. Wipe, sponge or mop affective areas with a mixture of 2 ounces of Kill Odor SR to each one gallon of water (64:1)

Flash point: Non-combustible.

pH: in use: 6.0-8.0 mildly acidic.

Conveniently packaged:
Available in 4/1 gallon case, or economical 5 gallon container and 55 gallon drum.