Stain Removal Guide

1. Apply Neutral Detergent and blot.
2. Apply Acetic Acid and blot.
3. If necessary, apply Reducing Agent and blot. (Mix one measuring spoon
of Reducing Agent in ½ bottle of warm water. Replace cap and shake).
4. Rinse with water and blot.
5. Repeat if necessary.

1. Apply Neutral Detergent and blot.
2. Apply Acetic Acid and blot.
3. If necessary, apply Reducing Agent and blot. (Mix one measuring spoon
of Reducing Agent in ½ bottle of warm water. Replace cap and shake).
4. Rinse with water and blot.
5. Repeat if necessary.
Another more effective method is to cut Fabpro's Heavy duty neutral pre-spray 50/50 with water. Wet a white turkish towel with this mix and lay it on the stain. Place a hot electric iron (heat setting to till steam comes out) on the wet towel. The color will transfer to the turkish towel. Repeat the procedure on another clean area of the towel till most the color is removed.

1. Apply Neutral Detergent and blot.
2. Apply Acetic Acid and blot.
3. If necessary, apply Reducing Agent and blot. (Mix one measuring spoon
of Reducing Agent in ½ bottle of warm water. Replace cap and shake).
4. Rinse with water and blot.
5. Repeat if necessary.

1. Mix one measuring spoon of Enzyme Detergent in ½ bottle of very warm tap water. Replace dispenser cap and shake to dissolve.
2. Apply to spot or stain (do not over wet) and blot.
3. If necessary; apply Ammonia Solution and blot.
4. Rinse with water and blot

1. Apply Paint, Oil, and Grease Remover (or Citrus Solvent ) and blot.
2. Apply Volatile Solvent and blot.
3. Apply Neutral Detergent and blot.
4. Rinse with water and blot.
5. Repeat if necessary.

1. Apply Paint, Oil, and Grease Remover (or Citrus Solvent ) and blot.
2. Apply Volatile Solvent and blot.
3. Apply Neutral Detergent and blot.
4. Rinse with water and blot.
5. Repeat if necessary.
6. If offending substance does not respond, use the heat transfer method
employing Fabpro's Neutral Pre-Spray and Soil Remover (sold separately)
at 1:1 dilution with water.

1. Mix one measuring spoon of Enzyme Detergent in ½ bottle of very warm
tap water. Replace dispenser cap and shake to dissolve.
2. Apply to spot or stain (do not over wet) and blot.
3. If necessary; apply Ammonia Solution and blot.
4. Rinse with water and blot.
5.If necessary, apply Reducing Agent and blot. (Mix one measuring spoon
of Reducing Agent in ½ bottle of warm water. Replace cap and shake).
6. Rinse with water and blot.

1. Apply Rust Remover to a cotton swab. Using the wetted cotton swab, gently contact the rust stain.
2. When stain disappears, neutralize with Ammonia Solution, rinse with Neutral Detergent and blot.
3. Rinse with water and blot.